Level 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Masonry repairGas fireplace service
Before
After
Before
After
Before
AfterChimney Cleaning in Frisco, TX
Chimney cap and crown work in Frisco runs $180-$1,800 depending on whether we’re installing a new cap on a prefab chase or rebuilding a masonry crown. Most Frisco homes built between 1998 and 2010 have factory-built fireplaces with metal chase enclosures, and those chase covers rust through predictably after 15-20 years. Call (469) 429-2623 for a written estimate before any work starts.
Level Two Chimney Co. inspects and repairs chimney caps and crowns across Frisco’s master-planned communities. Our crews carry prefab chase caps and masonry crown materials on every truck, and every job includes a camera-scan inspection and documented photo record under Haven Standard Clause 4.
Why Frisco Homes Are Different
Frisco’s housing stock is almost entirely tract homes built after 1998, nearly all with zero-clearance prefabricated fireplaces from builders rather than traditional masonry chimneys. In neighborhoods like Stonebriar and The Trails, crews find the same failures repeatedly - cracked refractory panels, rusted chase covers, and corroded dampers - because identical units were installed across whole streets.
Our mild winters mean most Frisco homeowners use their fireplace only a handful of times yearly. That disuse accelerates damper corrosion and invites starlings and squirrels to nest in the chase during long warm months. When hard freezes hit, as they did in February 2021’s Winter Storm Uri, residents light fires in systems that haven’t been inspected in years.
HOA architectural committees in communities like Phillips Creek Ranch and Newman Village often require cap style approvals, so we photograph the existing unit and submit documentation before ordering replacements.
Our Main Frisco Services
These are the three services Frisco homeowners call us about most often.
Chimney Cleaning & Sweep in Frisco
We clean prefab and masonry chimney systems throughout Frisco, removing creosote buildup, nests, and debris from chase enclosures and flues. Every sweep includes our NFPA 211 Level 2 camera inspection and a documented photo record. Chimney Cleaning & Sweep in Frisco
Chimney Repair in Frisco
Our Frisco repair work focuses on chase cover replacement, refractory panel repair, damper restoration, and masonry repointing where needed. We quote every repair in writing before starting, with photos showing exactly what we found. Chimney Repair in Frisco
Fireplace Services in Frisco
We service gas and wood-burning fireplace inserts across Frisco, including burner cleaning, pilot troubleshooting, and refractory panel replacement on aging Heatilator, Majestic, and Superior units. Every visit includes a written scope and warranty. Fireplace Services in Frisco
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterChimney Cap & Crown in Frisco
Frisco’s earliest master-planned communities are now 20-25 years old, and their prefab chase covers are rusting through in predictable patterns. In Stonebriar and The Trails, we regularly find the same galvanized chase cover failure on house after house. For masonry homes, crown cracks from North Texas temperature swings let water into the flue system. Chimney Cap & Crown work is our most common Frisco service call.
Cap Replacement
Signs you need it
Rust stains on the chase siding, water dripping into the firebox, or a missing or damaged cap visible from the ground.
What it costs in Frisco
Prefab chase cap replacement typically runs $180-$450; multi-flue custom caps range $350-$850.
How we do it
We measure the chase opening, photograph the existing unit for HOA documentation if needed, install a stainless steel or copper cap from our stocked inventory, and document the completed work with photos.
Crown Repair
Signs you need it
Visible cracks in the concrete crown, pieces of mortar falling into the firebox, or water stains on the ceiling near the chimney.
What it costs in Frisco
Crown coating runs $450-$850; partial crown rebuilds range $800-$1,500; full crown replacement is $1,200-$1,800.
How we do it
We grind out cracked material, apply a bonded crown coat or pour new concrete with proper slope and drip edge, then seal and photograph the finished surface.
What Chimney Cap & Crown Costs in Frisco
| Item | Typical range in Frisco |
|---|---|
| Prefab chase cap replacement | $180 - $450 |
| Multi-flue custom cap | $350 - $850 |
| Crown coating | $450 - $850 |
| Partial crown rebuild | $800 - $1,500 |
| Full crown replacement | $1,200 - $1,800 |
How long does a chase cap last in Frisco?
Galvanized builder-grade caps typically fail in 15-20 years; our stainless steel and copper caps carry longer expected service life and are backed by our 365-Day Done Right Promise.
Will my Frisco HOA approve the cap style?
We photograph your existing cap and submit documentation to your HOA architectural committee before ordering, ensuring the replacement meets community standards.
Chimney Liner & Rebuild in Frisco
Frisco’s prefab fireplace systems rarely need traditional flue liners, but when we do encounter masonry chimneys in older sections of town or custom builds, liner failure is a serious hazard. Cracked terracotta liners or missing liner sections can allow combustible gases into wall cavities. Chimney Liner & Rebuild work requires camera documentation to verify the full flue condition before we quote.
Stainless Steel Liner
Signs you need it
Cracked flue tiles visible on camera inspection, smoke drafting poorly into the room, or a home inspector flagged the chimney for sale.
What it costs in Frisco
Stainless steel liner installation typically runs $2,500-$4,500 depending on flue height and diameter.
How we do it
We run a camera to map damage, drop a properly sized DuraFlex or Olympia Chimney stainless liner with insulation, and document the completed installation with video and photos.
Partial Rebuild
Signs you need it
Spalling brick above the roofline, a leaning chimney stack, or mortar joints eroded to finger-depth.
What it costs in Frisco
Partial rebuilds from the roof up range $3,500-$6,500; full chimney rebuilds start around $8,000 and run higher for tall structures.
How we do it
We scaffold the work area, remove damaged courses to sound masonry, rebuild with matching brick and proper crown detail, and photograph each stage.
What Chimney Liner & Rebuild Costs in Frisco
| Item | Typical range in Frisco |
|---|---|
| Stainless steel liner installation | $2,500 - $4,500 |
| Flexible liner with insulation | $2,200 - $3,800 |
| Partial rebuild (roof up) | $3,500 - $6,500 |
| Full chimney rebuild | $8,000 - $15,000+ |
Does every Frisco chimney need a liner inspection?
Masonry chimneys need verified intact liners; prefab systems have factory-built metal flues that we inspect for corrosion instead. Call (469) 429-2623 and we’ll tell you which applies to your home.
Can a cracked liner wait until next season?
We won’t recommend work without camera evidence you can see; if the crack is minor and the chimney is unused, we’ll document it and schedule follow-up inspection.
Brands We Service in Frisco
We stock caps, liners, and repair materials from DuraFlex, HeatShield, Gelco, and Copperfield through our Haven buying network. Most prefab chase caps and standard liner diameters are available same-day from our Dallas-Fort Worth warehouse. our brands
Pricing for Chimney Cleaning in Frisco, TX
| Service | Typical range in Frisco |
|---|---|
| Chimney sweep with Level 2 inspection | $180 - $280 |
| Prefab chase cap replacement | $180 - $450 |
| Multi-flue custom cap | $350 - $850 |
| Crown coating | $450 - $850 |
| Partial crown rebuild | $800 - $1,500 |
| Full crown replacement | $1,200 - $1,800 |
| Stainless steel liner installation | $2,500 - $4,500 |
| Partial chimney rebuild | $3,500 - $6,500 |
| Full chimney rebuild | $8,000 - $15,000+ |
Prices increase in Frisco when chase covers are custom-sized for oversized prefab units or when masonry work requires matching discontinued brick. We deliver a written price before any work starts, with no changes without your approval, under Haven Standard Clause 1.
Neighborhoods We Serve in Frisco
We schedule Frisco appointments with route density in mind, often booking multiple homes in the same community on the same day. Typical appointment windows are morning or afternoon, with a text when your technician is en route.
- Stonebriar
- The Trails
- Phillips Creek Ranch
- Newman Village
- Starwood
Service Area - Cities Near Frisco
Our crews dispatch from the Dallas-Fort Worth metro office and serve communities throughout the northern suburbs. We regularly schedule alongside Frisco appointments in Prosper, TX, The Colony, TX, Lewisville, TX, and McKinney, TX.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Chimney Cleaning in Frisco
Most cap replacements and sweeps don’t require permits; liner installations and structural rebuilds typically do. We handle permit applications as part of our scope when they’re needed, and we document approval before starting work.
We book most Frisco appointments within 3-5 business days, with route grouping in specific neighborhoods. Call (469) 429-2623 for current availability.
Schedule before first use; our mild winters mean many Frisco homeowners delay until November, creating a scheduling crunch. Early fall booking ensures your system is verified safe before the first cold night.
What happens when you call
- 1A real person answersNo phone trees - talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Frisco Customers Say
"They told me the flue was fine and I did not need a liner. Charged me for the inspection and nothing else. That is why I have called them twice since."
- Hal M."We were buying the house and needed a real inspection. The report had photographs, the standard it was done to, and a clear repair figure. The seller paid for the repair."
- Lorna D."Cap and crown replaced after water was getting in. Price was quoted in writing, and they showed me the mortar failure first."
- Neil O.